Setting up Milestone ONVIF Bridge in Lumeo

Milestone ONVIF Bridge can be setup as a "Camera" within Lumeo, to bulk import multiple streams and remove the requirement to configure a "Source ID" in the Trigger Milestone Event node.

When using multiple Gateways to process Milestone streams, you should setup the same Milestone Bridge as a camera for each Gateway separately.

Lumeo does not discover the Milestone Bridge automatically. To set it up, use the Add Camera button from a Gateway that can access the Milestone Bridge, and specify the Bridge IP address along with the Port number. Milestone ONVIF Bridge typically uses Port 580 for ONVIF, so you'd specify it as x.x.x.x:580

📘

Port forwarding for Lumeo Cloud Gateways

If you wish to access the Milestone ONVIF Bridge using a Lumeo Cloud gateway, you will need to port forward Ports 580 and 554 so that they are accessible by the Lumeo Cloud Gateway IP (found in Lumeo console).

Then, use the public IP address and the corresponding forwarded ONVIF port in the settings below.

Once setup, the Bridge will show up as a Camera in Lumeo, and individual streams will show up under Streams in the Camera detail view.

Trigger Milestone Events

Lumeo can trigger Events in Milestone when certain analytics conditions are met. To do so, add a Trigger Milestone Event node to your pipeline and configure it with the trigger condition and Milestone credentials.